Living room wall pad - Top right "앱스(Apps)" - 냉방(Cooling mode)
Select 거실(living room),방1(room 1), 방2(room 2)
Each room can be controlled with the small pad at the bottom
(air conditioner remote control can also be used)
Notes
It has 냉방(Cooling)/자동(Auto)/제습(Dehumidifying)/송풍(Fan functions) available, controllable by remote control.
No heating mode available.
Living room wall pad - Top right "Apps" - Heating mode
Select 거실(living room),방1(room 1), 방2(room 2)
Each room can be controlled with the small pad at the bottom
When the wall panel's bottom section is in hot water mode, heating cannot be used. Please operate as follows:
※ How to switch from hot water mode to heating mode: Press and hold the 'Heating Mode' button for 3 seconds or more
Notes
Setting the temperature higher than the current temperature will warm the floor, but setting it too high will make the floor extremely hot. We do not recommend raising the temperature all at once.
You can use hot water by turning the faucet head to the left without any separate wall pad manipulation.
※ For high-floor rooms, it may take some time for hot water to come out.
Q. There's no hot water
A. Please unplug the cord connected to the communication device in the kitchen sink cabinet, wait 5 seconds, then reconnect it.
If the issue persists, please check the error code on the living room wall pad and contact customer service.