How to operate:
Please press the power (black circle).
For floor heating: Touch the area marked with a red circle, then use the center wheel to set the temperature.
Room temperature may take time to rise, so set to the highest temperature first, then gradually lower as needed.
If hot water is not working: Touch the area marked with a yellow circle and adjust the temperature using the center wheel.
If you wish to use only hot water, press the '온수전용' button. (Yellow circle)
Set the temperature by turning the round dial in the center of the pad.
You can be used with the remote control of the Air conditioner.
Please press the power button to activate the air conditioner.
Use the '온도조절' button to adjust the cooling temperature.
You can press '파워모드' to accelerate the cooling.
Heating (heater) functions are not available with air conditioners.
How to operate: Press the '온수전용' button at the wall pad and turn the handle toward the hot water direction
※ If you are unable to use hot water after running the faucet for 5 minutes, please contact customer service.
(Example_Hot water direction)