If the TV shows "No Signal" and there is no picture:
Check the power and cable connections of the set-top box near the TV.
Turn the set-top box off and on again, then wait about 5 minutes.
Make sure the TV input source is set to HDMI1.
If the TV doesn’t turn on with the Olleh KT remote control(This may happen if the remote is no longer paired with the TV)
Press the power button on the back of the TV (top left corner) to turn it on manually.
To re-pair the remote control (Instructions are also printed inside the battery cover of the remote):
Press and hold the TV Power and OK buttons at the same time for more than 3 seconds.
Press the Channel Up button repeatedly and slowly until the TV turns off.
Once the TV turns off, press the OK button once to complete the pairing.
Drying not available (A drying rack is provided in the closet)
Laundry detergent is provided (Fabric softener is not included)
Bathroom Storage Cabinet Provided
Press the button to remove the water bottle and fill it with water.
② Press the button to turn it on and preheat it.
③ Press the button to apply steam. *③ When the button is lowered, steam is fixed. *The steam is very hot, so please be careful of burns.