Remote controller
Press the power button on the top left to start/stop air conditioning.
Use the mode(모드) button to select between cooling/fan/dehumidification.
Press "+" or "-" buttons to set your desired temperature.
Notes
After turning on the power, there may be a delay of approximately 30 seconds to 1 minute
Wall Panel Operation Instructions
Press the power button to start heating.
Press the MODE button to set it to "A" mode for normal operation.
To turn off heating, press the MODE button and set to "OFF"
Notes
"SET" on the panel display indicates the set temperature.
"TEMP" indicates the current temperature.
Hot water is available by simply turning the faucet or shower head toward the hot water direction without any additional operation.
If Hot Water Is Not Coming Out
Set all hot water taps (sink, bathroom basin, and shower) to the hot position and let them run simultaneously for 10-15 minutes.
It may take some time for hot water to reach your room.
If hot water is still not available, please contact the mobile front desk for assistance.