If the screen is off, press the power button to turn it on.
Press the heating button on the left, then turn the dial to adjust the temperature.
To stop the heating, press the Away Mode button. The floor will gradually cool down.
Setting the temperature too high may cause the floor to become uncomfortably hot. Please use with caution.
After activating Away Mode(외출), wait a moment and hot water should be available.
If hot water does not work in Away Mode, press the hot water(온수) button on the boiler pad and use the dial to adjust the temperature.
If you only wish to use hot water, press the Hot Water Only button.
Use the white remote control provided in the room to operate the air conditioner.
Press the red power button to turn it on.
Q1. The air conditioner is on, but there’s no cold air.
A1. Please check if it is set to Cooling Mode and the temperature is set lower than the current room temperature.
Q2. The heater is on, but the room doesn’t feel warm.
A2. Check if it is set to Heating Mode and the temperature is set to at least 24–26°C.
If it is set to Away Mode or Hot Water Only, the room will not be heated. Please switch to Heating Mode.
If you see an error code such as “CH”, “E1”, or “E2” on the display, it indicates a malfunction. Please contact the Mobile Front Desk for assistance.
Q3. There’s no hot water.
A3. Make sure the boiler controller is turned on. If it’s off, press and hold the power button for 2–3 seconds to turn it on.
How to Set Hot Water Temperature
Press the Hot Water button → Turn the center dial to adjust the temperature.