Induction Cooktop
Induction-compatible set (pot & pan)
Tableware (plates, cups, cutlery set, wine glasses, bottle opener)
Microwave with oven function
Electric Kettle
Coffee Machine
Large-capacity dish soap & sponge
Seasonings are not provided.
Cooking that produces heavy smoke (e.g., grilling meat or fish) is not allowed.
Press and hold the Power button for 1 second to turn it on.
Press the burner you want to use, then select the heat level using the number buttons.
To turn off, press the Power button again.
[Instruction Video for Induction Use]
Check the gas controller under the hood on the right side.
Make sure the yellow light (Electric ON) is ON.
If the red light (Electric OFF) is ON, press and hold the ON/OFF button for 3 seconds to turn it on.
Select a function on the oven panel.
Choose the microwave strength (High, Medium, Low) by pressing the Select button.
Adjust the time using the Dial.
Press the Start button to begin.
press and hold the ON/OFF button under the hood for 3 seconds to turn it OFF.
For use of the oven or induction, make sure the power switch is ON.
If the faucet head does not retract properly, please check under the sink for the weight that may be caught on wiring.
Pull the weight toward the power outlet as shown in the photo.
In rooms with a kitchen island: Open the top drawer, then pull out the inner drawer to access the cutlery.
Fill the water tank. (Lift the lid upwards to remove the tank.)
Press either button to power on the machine.
Blinking lights = Preheating (about 25 seconds)
Steady lights = Ready to brew
Press:
- Espresso (small cup / 40ml)
- Lungo (large cup / 110ml)
To stop brewing mid-process or fill more, press the same button again.
Lift and lower the handle to eject the used capsule.
Cleaning the Machine
Fill the water tank completely.
Place an empty container (at least 0.6L) under the outlet.
Press and hold both buttons for 3 seconds – lights will start blinking.
While holding the Lungo button, wait for the tank to empty.
Cleaning is complete when all water has been dispensed.
When to reset:
Water amount too low
Lights keep blinking even after 30 seconds
Steps to reset
Check if the water tank is filled.
Press and hold the Lungo button (large cup) for 5–6 seconds.
The Espresso button (small cup) should blink 3 times.
Release the Lungo button.
Turn the power off and back on. Press both the Espresso and Lungo buttons simultaneously.
If the issue persists, please contact the Mobile Front Desk for support.